To Next PageTo Next PageWhat to do if my Fimar MPF1,5 does not start?
If your Fimar Pasta Maker isn't starting, there could be a few reasons. First, check if the main switch is turned off and set it to “I”. If there's no voltage on the power supply or the safety fuse is burnt out, it is best to contact your dealer's service center.
Explains the manual's role in machine operation and safety guidelines.
Highlights DANGER and INFORMATION symbols for hazard awareness and important technical notes.
Details how to identify the machine model, serial number, and manufacturer.
Describes the machine's design, materials, and dual function for pasta making.
Lists key technical data including power, capacity, dimensions, weight, and noise level.
Provides physical dimensions (A, B, C) for different MPF models in millimeters.
Specifies dimensions for the optional rack accessory for the MPF/8 model.
Explains the function of safety features like micro switches and circuit breakers.
Outlines crucial safety precautions, user responsibilities, and operational guidelines.
Informs about residual risks, specifically potential burning hazards to upper limbs.
Provides instructions for handling, opening, and checking the machine's packaging.
Specifies ideal environmental and spatial conditions for machine installation.
Details the procedure and safety warnings for connecting the machine to the power supply.
Identifies and explains the function of each control on the various machine models.
Step-by-step guide on operating the pasta machine for dough preparation and extrusion.
Provides guidelines on ingredient ratios and dough consistency for quality pasta.
Instructions on how to correctly assemble and connect the electronic knife component.
Details the daily cleaning process for the machine, lid, basin, and internal parts.
Guidance on proper storage procedures for the machine when not in use long-term.
Advises on initial steps to take in case of machine breakdowns or malfunctions.
Lists common operational issues, their likely causes, and recommended solutions.
Provides instructions on proper machine disposal and recycling according to regulations.
Illustrates MPF/1,5-2,5 model components with numerical references for identification.
Comprehensive list of MPF/1,5-2,5 spare parts with codes, characteristics, and descriptions.
Illustrates MPF/4 model components with numerical references for identification.
Comprehensive list of MPF/4 spare parts with codes, characteristics, and descriptions.
Illustrates MPF/8 model components with numerical references for identification.
Comprehensive list of MPF/8 spare parts with codes, characteristics, and descriptions.
Shows the electrical schematic for the 1-phase models (MPF/1,5 - 2,5).
Displays the electrical schematic for the 3-phase models (MPF/4 - 8).
General| Category | Pasta Maker |
|---|---|
| Model | MPF1, 5 |
| Power | 0.3 kW |
| Voltage | 230V/50Hz 1N |
| Frequency | 50 Hz |
| Production Capacity | 0.5 kg |
| Weight | 21 kg |
| Dimensions | 250 x 480 x 290h mm |
| Material | Stainless Steel |
| Hourly Production | 1.5 kg/h |
