Fimer PVS-50-TL - Network Hosts; Inverter Network Configuration

170
000704AG-F
9 - Attachments
9
Network Hosts
The inverter will connect to the following hosts. Some servers owned by
FIMER, and others are customer or ISP servers. Servers listed as ow-
ned by “Customer IT/ISP” must be congured in the inverter using either
DHCP or as static network information.
Host Purpose Port Owner/Manager
platform.auroravision.net Data, conguration TCP:443 FIMER
gw1.auroravision.net and/or
apt.fatspaniel.net
Inverter rmware upgrade TCP:443 FIMER
Site dependent DHCP (optional)
UDP:67,
UDP:68
Customer IT/ISP
Site dependent DNS
UDP:53,
TCP:53
Customer IT/ISP
Inverter network configuration
The inverter requires a valid network conguration in order to operate.
This information can either be provided by a DHCP server provided by
the customers network (the default), or the inverter can be congured
with static network information. Regardless of how the inverter is con-
gured, the following information is required.
Conguration Purpose
IP Address
Allows the inverter to take part in the local network. This does not need to
be a public IP address. In most cases this is a private IP address.
Subnet mask Used to determine if two computers are on the same network.
Gateway
The IP address of the computer which will forward network trafc from the
local network to an external network
DNS Server The IP address(es) of the computer(s) which resolve domain names.