Fimer PVS-50-TL - Front Cover Closure

88
000873AG-F
5 - Installation
Front cover closure
After terminating the connection and conguration of the inverter and be-
fore commissioning, the inverter’s front cover must be closed.
It is necessary to ensure the correct closing of the cover to maintain the IP protection degree
of the inverter
- Carefully close the cover.
- Insert the key in the key lock
08
- Turn the key lock
08
in “LOCK”
- Repeate the operation for the other key lock
08
Commissioning of the inverter can be started once the cover have been
closed
IP65
PVS-60
1
2
3
OPEN
LOCK