Fimer SYMPLEX 320 - Shielding Gas Supply; Shielding Gas Quantity Regulation; Mig;Mag Welding Shielding Gas Setting

FUNCTIONING
16
4
4.4 SHIELDING GAS SUPPLY
Injuries danger caused by overthrow of the gas protection cylinders!
Gas protection cylinders can overturn in case of inadequate xing and seriously injure people!
• Assure the protection gas cylinders by the available protection elements provided on trolleys
• Protection gas cylinders must join rmly to the matching circumference!
• On the protection gas cylinder valve must not be any xing element!
4.5 SHIELDING GAS QUANTITY REGULATION
Wrong use of protection gas cylinders
A wrong use of protection gas regulation can cause hard injuries and death.
• Follow the gas manufacturer indications and the suggestions for pressured gas!
• Install the gas cylinder in the arranged seat and assure it by protection elements!
• Avoid overheating of protection gas cylinder
4.6 MIG/MAG WELDING SHIELDING GAS SETTING
WELDING PROCESS RECOMMENDED PROTECTION GAS QUANTITY
MIG WELDING Ø WIRE x 11.0 = l/min
MAG WELDING Ø WIRE x 11.0 = l/min
ALLUMINIUM WELDING Ø WIRE x 13.0 = l/min (100% Argon)
NOTE: Both low and high settings can let air penetrate into welding pool, causing
the making of pores.
Gas quality MUST be adapted to the welding work type.