Fimer SYMPLEX 320 - Care and Maintenance; Daily Maintenance; Monthly Maintenance; Repairs

26
8.1 DAILY MAINTENANCE
• Supply cable and its discharge traction
• Welding current conductors (verify their locked and tight position)
• Gas tubes and their commutation devices (electric valve)
• Gas cylinder xing elements
• Use, alert, protection and position devices (functioning control)
• Various, general conditions
8.2 MONTHLY MAINTENANCE
•
Envelope damages (front, back, lateral sides)
• Adjustable wheels and their xing elements
• Transport elements (belt, eyebolts, handle)
• Step switches, control equipments, emergency arrest devices, tension adapter device, control and
alarm leds
• Verify the presence of impurities inside the cooling liquid exible tubes and into their connections
• Verify the tight position of wire guide elements (entry junction, guide tube)
In addition to the control rules here explained, it is necessary to observe local laws and disposals.
8.3 REPAIRS
Repair and maintenance acts must be done only by specialized and authorized persons.
Otherwise warranty right is declined. For everything You need assistance, please contact Your specialized
vendor. The replacement of under warranty products can be done only by Your own vendor. When You
replace components please use only original spares. When You order spare parts please indicate type of
machine, its code and serial number also code and model type of the spare part.
NB: As regarding the disposal please take a look at the bottom of this manual.
8
CARE AND MAINTENANCE