10 Fault Finding Guide Doc. version 2
2.4 Network Card Fault Pseudo Points FIRECLASS Fire Alarm Control Panels
2.4 Network Card Fault
Pseudo Points
When reported on the user interface or via printers, the
output format used for faults reported from Network
Card Fault points is:
‘TLI Pnn’
where nn is the point number 01–11
This section refers to faults assigned to the
network card. The configuration is controlled
by the use of the options in the ‘Site Details’
dialog box in Express.
Point
Address
Label Use
1 Net Card Common The Common fault is the 'OR' of all the other faults. The
common fault condition becomes true if any of the other
fault conditions are true. In practice, it is unnecessary to
have a common fault message in addition to a detailed
message. In these circumstances, the Common fault
should be disabled.
Table 4: Network Card Pseudo Points
To Next Page
Loading...
