10
Figure 8: Firmware update window
Firmware update menu
Click on Firmware Update; see Figure 8. From a source
file, you can carry out a firmware update of all the system
interface including the Main board, User interface, Loop
controller and Repeater.
Note: If the FC500 has a firmware version 3 or less, and
the language is Italian while English appears on the panel,
the installer must realign the language strings after the
firmware update, using the language change process; see
paragraph 8-Key System on page 47 of the Installation
manual.
Screen saver menu
In the Screen Saver menu, you can insert four lines of text,
such as installer address and telephone, which will load on
the user interface display when the panel is in standby
status. The four rows can include steady, scroll or blink.
Account menu
In the Account menu, enter the account data. For better
account identification, enter the address, click on the
address field and the software attempts to find the address
on Google maps if you have an internet connection.
To Next Page
Loading...
