FireClass FC600 - 2 Operating Instructions; Indicators and Controls

Operating instructions FireClass Panels and Repeaters
6 User Manual Doc. version 2.0
2 Operating instructions
2.1 Indicators and controls
The front panel is shown in Fig. 1. The numbered items
in the figure are explained in the following paragraphs.
Your panel version may not match the figure exactly,
but the same items will be present, although perhaps
not in the positions shown.
Colour LCD display
The 640 character backlit colour LCD alphanumeric dis-
play, arranged in 16 rows of 40 characters, displays user
interaction information, such as alarms, status mes-
sages, and responses to user input.
The colour LCD borders are blue and remain the same
colour regardless of the panel status.
Alphanumeric keypad
Use the alphanumeric keys to enter access codes, text
strings, or general information.
Fig. 1: FireClass FC600 series panel front panel
1 – Colour LCD display
2 – Alphanumeric keypad
3 – Function keys
4 – ALARM CYCLE key
5 – SILENCE/RESOUND key
6 – RESET key
7 – Control keys
8 – Status LEDs
9 – Zone status LEDs
10 –Enable keyswitch*
1
2
3
4
7
9
6
10
5
8
8
Key Usage
Use to enter the number 0 or a space.
Table 2: Alphanumeric keys and arrow keys
Fig. 2: FireClass FC600 series panel front panel- Scandina-
vian variant
1 – Colour LCD display
2 – Alphanumeric keypad
3 – Function keys
4 – ALARM CYCLE key
5 – SILENCE/RESOUND key
6 – RESET key
7 – Control keys
8 – Status LEDs
9 – Zone status LEDs
10 –Enable keyswitch* (SS 3654)
1
2
3
4
5
6
7
8
8
9
10
0