FIRST STOP SAFETY 13
MemoryPAT-Blu Issue 1.2
FORMAL VISUAL INSPECTION
Once the above preparation work has been carried out, the visual inspection is
quite straightforward. It is important to prepare a Test Record for each piece of
equipment. A sample form is provided that can be photocopied and used as
required. This form will be used to record the history of visual inspection and
testing.
Formal Visual Inspection is a very important part of making sure that appliances
are safe to use. In fact, the majority of faults can only be found by a good visual
inspection of the appliance. The following is a list of faults to look for:
Cable
Damage to power cable sheath. Any non-standard joints.
Appliance
Signs that the equipment has been subject to conditions for which it is not
suitable, e.g. wet or excessively rusty.
Cable not being gripped. Damage to external casing.
To Next Page
Loading...