FIRST STOP SAFETY 26
MemoryPAT-Blu Issue 1.2
These adaptors are designed to be used only with the MemoryPAT-Blu for
testing purposes; under no circumstances are they to be connected to a
mains outlet.
MEMORY
The MemoryPAT-Blu saves the last 2000 test results in internal memory. The
user can review these at any time by pressing the Memory ◄ button found on
the right of the Display. Pressing the Memory ◄ button again will show older
results while pressing the Memory ►button will show more recent test results. If
the Memory ◄ or the ► buttons are kept pressed for more than 5 seconds, the
unit will step through the memory faster in steps of 10.
Each test is given a unique test number (188 in the above example) and this is
displayed on the last line of the display. During a days testing, this number can
be recorded against an item being tested. More detail regarding the tests can be
added at a later time by reviewing the test results using the Memory ◄ and ►
buttons.
To Next Page
Loading...
