FIRST STOP SAFETY 4
MemoryPAT-Blu Issue 1.2
SAFETY
Please read this manual carefully to make yourself familiar with the
capabilities and functions of the MemoryPAT-Blu before attempting to use
it.
1. This manual contains all the information necessary to carry out in-
service testing of all electrical appliances. If after reading this manual
you are still not confident about carrying out the tests then please
consider either attending one of our many courses held around the UK
or studying our Distance Learning Package on Portable Appliance
Testing. See our website www.firststopsafety.co.uk for details.
2. The unit is designed to be powered from a rechargeable 9V NiMH
battery. This is built into the unit and is not designed to be a user
replaceable item.
3. The IEC socket provided is for the testing of IEC leads. Take great
care not to plug an IEC lead into the mains and then into this
socket. This could invalidate your warranty. However, if this should
happen accidentally the unit is protected internally.
4. A USB lead and mains adapter is supplied to charge the batteries. There
is no mains power-on switch. To isolate the unit from the mains, either
switch off at the mains socket or disconnect the USB lead.
5. There are no user serviceable parts in this unit. Under no circumstances
should the user attempt to open the unit. If opened, the warranty will be
invalidated.
6. The MemoryPAT-Blu is guaranteed for one year from the date of
purchase. Please keep your invoice as proof of purchase. Should the
unit require a service, repair or calibration, please return it to the address
at the back of this user manual. See inside back cover for our Lifetime
Warranty.
When returning the unit, please contact the Sales Department to receive
a Returns Number. The owner will be advised of any costs prior to work
commencing.
To Next Page
Loading...
