First Stop Safety MemoryPAT-Blu - Testing 110 V Appliances; Testing 3-Phase Appliances

FIRST STOP SAFETY 25
MemoryPAT-Blu Issue 1.2
Once the testing is complete, record the results and the unique test number in
the Test Record.
TESTING 110 V APPLIANCES
This requires a 110 V adaptor. This adaptor allows appliances with 110 V plugs
to be tested. Just plug the adaptor into the MemoryPAT-Blu and connect the
appliance to be tested into the yellow 110 V socket. Then use the MemoryPAT-
Blu as normal.
TESTING 3-PHASE APPLIANCES
This requires a 3-phase adaptor (Various models available). This adaptor allows
appliances with 3-phase plugs to be tested. Just plug the adaptor into the
MemoryPAT-Blu and connect the appliance to be tested into the 3-phase socket.
Then use the MemoryPAT-Blu as normal.