First Stop Safety MemoryPAT-Blu - Testing Class II Equipment

FIRST STOP SAFETY 19
MemoryPAT-Blu Issue 1.2
Hot melt gun; nozzle Iron; Behind plate
TESTING CLASS II EQUIPMENT
The equipment to be tested is plugged into the mains socket on MemoryPAT-
Blu. The test clip is connected to any exposed metal on the equipment, if present.
Press the Class II button. The MemoryPAT-Blu will first check that the power
switch on the item is in the ON position. If it is then the testing will begin. If the
user has forgotten to switch the appliance ON then the MemoryPAT-Blu will
display the following reminder message.