FIRST STOP SAFETY 7
MemoryPAT-Blu Issue 1.2
FEATURES
PAT TESTS
CLASS I TEST
When this button is pressed, the unit will test Earth Continuity and Insulation
Resistance showing the results for each test and an overall PASS or FAIL on the
LCD display.
CLASS II TEST
When this button is pressed, the unit will test Insulation Resistance showing the
result for the test and an overall PASS or FAIL on the LCD display.
POWER CORD
When this button is pressed, the unit will carry out an Earth Continuity, Insulation
Resistance and a Wiring test showing the results for each test and an overall
PASS or FAIL on the LCD display.
POWER ON TEST
When testing appliances it is important to make sure that their power switches
are in the ON state. The MemoryPAT-Blu will carry out a Power ON Test before
proceeding with a Class 1 or a Class 2 test.
If a test is started and the user has forgotten to switch the appliance ON, then as
soon as the appliance is switched on the test will continue. If it is not possible to
switch the appliance ON, then it is possible to skip this test.
To Next Page
Loading...
