FIRST STOP SAFETY 17
MemoryPAT-Blu Issue 1.2
As soon as the appliance is switched ON the MemoryPAT-Blu will continue with
the test. Note that not all appliances have an ON switch and it may not be
possible to switch some appliances ON. In this case the user can skip this check
and carry on with the main testing by pressing the Class I button again. If the
user does neither then the unit should abort this test and power down.
The test will now run and the display will show the test results for the Insulation
Resistance and Earth Continuity tests as well as an overall Pass or Fail. The
image below shows the result of a test that shows a pass. The test number on
the last line (188 in this example) increments automatically for each test. The
user should make a note of this unique number in the test records against the
appliance being tested.
Here is a result that results in a fail due to the Earth Continuity being too high.
To Next Page
Loading...
