7-2 Isotemp Basic Fisher Scientific
THERMO FISHER SCIENTIFIC FREEZER INTERNATIONAL DEALER WARRANTY
The Warranty Period starts two months from the date your equipment is shipped from our facility. This allows for shipping time
so the warranty will go into effect at approximately the same time your equipment is delivered. The warranty protection
extends to any subsequent owner during the warranty period. Dealers who stock our equipment are allowed an additional four
months for delivery and installation, providing the warranty card is completed and returned to the Technical Services
Department.
During the first two years of the warranty period, component parts proven to be non-conforming in materials or workmanship
will be repaired or replaced at Thermo's expense, labor excluded. The ULT Freezers include an additional two year warranty
on the compressors, parts only, F.O.B. factory. Installation and calibration is not covered by this warranty agreement. The
Technical Services Department must be contacted for warranty determination and direction prior to any work being performed.
Expendable items, i.e., glass, filters, pilot lights, light bulbs and door gaskets are excluded from this warranty.
In addition to the standard warranty, the foamed-in-place cabinet design carries a unit production lifetime warranty (foamed-in-
place cabinet, evaporator and foamed-in-place door; parts only). Please contact your sales representative or Thermo for addi-
tional information.
Replacement or repair of component parts or equipment under this warranty shall not extend the warranty to either the equip-
ment or to the component part beyond the original two year warranty period. The Technical Services Department must give
prior approval for the return of any components or equipment.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL, OR
IMPLIED. NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY.
Thermo shall not be liable for any indirect or consequential damages including, without limitation, damages relating to lost
profits or loss of products.
Your local Thermo Sales Office is ready to help with comprehensive site preparation information before your equipment
arrives. Printed instruction manuals carefully detail equipment installation, operation, and preventive maintenance.
If equipment service is required, please contact your local distributor or Thermo (1-800-438-4851 in USA and Canada, or
1-740-373-4763). We're ready to answer your questions on equipment warranty, operation, maintenance, service, and special
applications. Outside the USA, contact your local distributor for warranty information.
ISO
9001
REGISTERED
Rev. 0 6/11
To Next Page
Loading...