Lit. No. 94430/94431, Rev. 07 10 January 15, 2014
SAFETY INFORMATION
BATTERY SAFETY
NOISE
Airborne noise emission during use is below 70 dB(A)
for the spreader operator.
VIBRATION
Operating spreader vibration does not exceed 2.5 m/s
2
to the hand-arm or 0.5 m/s
2
to the whole body.
Recommended Fastener Torque
Chart (ft-lb)
Size
Torque
SAE
Grade 2
SAE
Grade 5
SAE
Grade 8
1/4-20 6913
5/16-18111
8
3/8-16 19 31 46
3/8-24 24 46 68
7/16-14305
5
1/2-13 45 75 115
9/16-1266110 165
5/8-11 93 15
25
3/4-10 150250 370
7/8-9150 37
91
1-8220 58
93
Metric Grade 8.8 (ft-lb)
Size Torque Size Torque
M 67M 12 60
M 817M 14 95
M 10 35 M 16 155
These torque values apply to fasteners
except those noted in the instruction.
CAUTION
Read instructions before assembling.
Fasteners should be nger tight until
instructed to tighten according to torque
chart. Use standard methods and practices
when attaching spreader including proper
personal protective safety equipment.
TORQUE CHART
CAUTION
Batteries normally produce explosive gases,
which can cause personal injury. Therefore,
do not allow ames, sparks, or lit tobacco
to come near the battery. When charging or
working near a battery, always cover your
face and protect your eyes, and also provide
ventilation.
• Batteries contain sulfuric acid, which burns
skin, eyes and clothing.
• Disconnect the battery before removing or
replacing any electrical components.
To Next Page
Loading...
