Lit. No. 96473/96474, Rev. 00 18 August 15, 2011
REMOVING THE SPREADER
REMOVING THE RECEIVER MOUNT
SPREADER
1. Unplug the spreader harness from the vehicle
harness.
2. Remove the receiver clamp, if installed.
3. Release and remove the ratchet straps.
4. Remove the pin from the receiver hitch.
5. Remove the spreader from the vehicle and stand
in an upright position. This may require additional
support.
NOTE: Empty the hopper before removing the
spreader.
CAUTION
During removal or mounting, securely grip
spreader to avoid dropping.
To Next Page
Loading...
