INSTRUCTION MANUAL FIT REMOTE DISPLAY PINION
HEIGHT
1. Current altitude
Since the indicated altitude depends on the air pressure, the incorrect altitude may
be displayed if the altimeter is not calibrated on a regular basis. Calibration should be
carried out at the point of departure as a minimum.
CADENCE
1. Current pedal speed
PULSE
1. Current pulse (only available in conjunction with a heart rate sensor)
PRESSURE (only available with an optional tire pressure sensor)
1. Current tire pressure, rear
2. Current tire pressure, front
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023 18
To Next Page
Loading...