FiT REMOTE DISPLAY - 2 About These Operating Instructions; Manufacturer; Language; Declaration of Conformity

INSTRUCTION MANUAL FIT REMOTE DISPLAY PINION
2 ABOUT THESE OPERATING INSTRUCTIONS
2.1 MANUFACTURER
Biketec GmbH
Luzernstrasse 84
CH-4950 Huttwil
fit-ebike.com/en-en/
2.2 LANGUAGE
The original operating instructions are written in German. A translation is invalid without the original operating in-
structions.
2.3 DECLARATION OF CONFORMITY
Biketec GmbH hereby declares that the products described in these operating instructions comply with EU directives.
The complete EU Declaration of Conformity is available online at: fit-ebike.com/en-en/service/declaration/
2.4 ON INFORMATION
Different markings are used in the operating instructions to make them easier to read.
2.5 WARNINGS IN THESE OPERATING INSTRUCTIONS
Warnings indicate hazardous situations and actions. You will find the following warnings in the operating instructions:

DANGER
May lead to serious or even fatal injuries if ignored. Medium-risk hazard.

CAUTION
May lead to minor or moderate injuries if ignored. Low-risk hazard.

NOTICE
May lead to material damage if ignored.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023 5