FiT REMOTE DISPLAY - 9 Cleaning and Servicing; Basic Cleaning; Cleaning the Display and Operating Element

INSTRUCTION MANUAL FIT REMOTE DISPLAY PINION
9 CLEANING AND SERVICING
9.1 BASIC CLEANING
9.1.1 CLEANING THE DISPLAY AND OPERATING ELEMENT

NOTICE
The display and operating element will be permanently damaged if water enters them.
Never immerse the display or operating element in water.
Never clean with a pressure washer, water jet or compressed air.
Never use cleaning agents.
Remove the display from the e-bike before cleaning.
Carefully clean the display and operating element with a soft, damp cloth.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023 50