FiT REMOTE DISPLAY - Page 49

INSTRUCTION MANUAL FIT REMOTE DISPLAY PINION
8B-xx up to 92-xx
Error code Error message displayed Action / Restriction
8B-xx Gears authentication error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
8C-06 Gears hardware error
Calibration required
1. Calibrate the gears as described in the
corresponding operating instructions.
2. If the problem persists, please contact your
specialist dealer.
8C-xx Gears hardware error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
9A-xx up to 9E-xx
Error code Error message displayed Action / Restriction
9A-xx Lock authentication error 1. Check whether an original FIT lock is installed.
2. Restart the system.
3. If the problem persists, please contact your
specialist dealer.
9B-xx Lock blocked 1. Restart the system.
2. Check lock for contamination.
3. If the problem persists, please contact your
specialist dealer.
9C-xx Lock hardware error 1. Restart the system.
2. Check lock for damage.
3. If the problem persists, please contact your
specialist dealer.
9D-xx Lock movement detected 1. Resend lock command
2. Restart the system.
3. Check lock for damage.
4. If the problem persists, please contact your
specialist dealer.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023 49