FiT REMOTE DISPLAY - Page 48

INSTRUCTION MANUAL FIT REMOTE DISPLAY PINION
Error code Error message displayed Action / Restriction
FF-xx Battery start error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
86-xx up to 8A-xx
Error code Error message displayed Action / Restriction
86-xx Speed node software error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
87-xx Speed node authentication error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
95-xx up to 99-xx
Error code Error message displayed Action / Restriction
95-xx Charger software error 1. Check whether the correct battery is installed
(36V / 48V).
2. Disconnect the charger from the system and
socket.
3. Wait until status LED goes out.
4. Reconnect the charger to the socket.
5. Reconnect the charger to the system.
6. If the problem persists, please contact your
specialist dealer.
96-xx Charger voltage error 1. Check whether the correct battery is installed
(36V / 48V).
2. Disconnect the charger from the system and
socket.
3. Wait until status LED goes out.
4. Reconnect the charger to the socket.
5. Reconnect the charger to the system.
6. If the problem persists, please contact your
specialist dealer.
97-xx Charger current error 1. Check whether the correct battery is installed
(36V / 48V).
2. Disconnect the charger from the system and
socket.
3. Wait until status LED goes out.
4. Reconnect the charger to the socket.
5. Reconnect the charger to the system.
6. If the problem persists, please contact your
specialist dealer.
98-xx Charger temperature error 1. Disconnect the charger from the battery.
2. Allow the charger to cool (> 30 minutes).
3. Restart the charging process.
4. If the problem persists, please contact your
specialist dealer.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023 48