FiT REMOTE DISPLAY - Page 47

INSTRUCTION MANUAL FIT REMOTE DISPLAY PINION
Error code Error message displayed Action / Restriction
69-04, 69-0D Battery temperature error 1. System operating below the permissible
temperature.
2. Allow the battery to warm up in a warm
environment (> 30 minutes).
3. Start the system.
4. If the problem persists, please contact your
specialist dealer.
69-05, 69-0A,
69-0F, 69-11,
69-12
Battery temperature error 1. Turn off the e-bike.
2. Allow the battery to cool down ((> 60 minutes).
3. Start the system.
4. If the problem persists, please contact your
specialist dealer.
69-06, 69-0B,
69-10
Battery temperature error 1. System operating below the permissible
temperature.
2. Allow the battery to warm up in a warm
environment (> 30 minutes).
3. Start the system.
4. If the problem persists, please contact your
specialist dealer.
69-13 Battery temperature error 1. Start the system.
2. If the problem persists, please contact your
specialist dealer.
6A-xx Battery software error 1. Check whether the correct battery is installed
(36V / 48V).
2. Check the plug contacts on the battery and
bicycle and clean if necessary.
3. Restart the system.
4. If the problem persists, please contact your
specialist dealer.
6B-xx Battery hardware error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
6C-xx Battery communication error 1. Check whether the correct battery is installed
(36V / 48V).
2. Check the plug contacts on the battery and
bicycle and clean if necessary.
3. Restart the system.
4. If the problem persists, please contact your
specialist dealer.
6D-xx Battery authentication error 1. Check whether the correct battery is installed
(36V / 48V).
2. Check the plug contacts on the battery and
bicycle and clean if necessary.
3. Restart the system.
4. If the problem persists, please contact your
specialist dealer.
6E-xx Battery unknown error 1. Check whether the correct battery is installed
(36V / 48V).
2. Check the plug contacts on the battery and
bicycle and clean if necessary.
3. Restart the system.
4. If the problem persists, please contact your
specialist dealer.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023 47