Before Use
Warning
To avoid electric shock or injury, please read the "Safety Instructions"
and all relevant parts before using this product.
In order to give full play to the functions of the instrument and ensure
safety, please read and follow this manual carefully.
This instrument strictly follows GB/T 13978-92 generic specification for digital clamp
meter, in accordance with GB4793.1-1995（IEC-61010-1, IEC-61010-2-032）electronic
measuring instruments safety requirements, and belongs to the class-two of pollution.
The voltage standard is CAT IV 600V and CAT III 1000V.
Please follow the safety instructions, ensure the safety use of the instrument.
Use and protect the item in the right condition, the instrument will be in satisfactory
service.
The user must comply with the standards of safety rules when using this instrument：
After receiving the instrument, check whether it is damaged in transportation.
If the instrument is stored or shipped under poor conditions, check and confirm
whether the instrument is damaged.
Inspect the test leads before use. Do not use them if the insulation is damaged or
metal is exposed.
Use the test leads provided with the instrument to ensure safety. If you need to
replace the test leads, please replace them of the same or similar grade.
- To protect against electric shock
- To prevent the misuse of the instrument
1. Preparations before Use
To Next Page
Loading...
Need help?
General