FLARM PowerFLARM - Technical Specifications; Unit and Component Specs; Communication and RF System Specs; Power and Battery Specifications

16
Technical Data
Dimensions:
x
Length: 94mm
x
Width: 96mm
x Height: 46mm
Operation:
x
Integral turn/push button
Audio:
x Built-in warning b
eeper
x
Output for Headset Audio
x Volume control
Communication:
x Internal RS232 NMEA
x Data output for Moving-
Map
unit and external displays
(only one user at
a time!)
x
internal power supply for
external units
Sensors and GPS:
x Pressure sensor
x Microphone
x Integral 50-
channel GPS
receiver
FLARM:
x 868MHz FLARM
Transceiver
ADS
-B:
x 1090 MHz receiver for
Mode-C/S and ADS-B
signals
Antennas:
x 868MHz FLARM antenna
(preinstalled and locked)
x ADS-
B antenna (on housing,
rpSMA-socket)
x
Integral GPS antenna
x External GPS-antenna,
optional connection (MCX-
socket)
Memory:
x SD card slot (Micro-SD)
x
Update via SD card possible
Fixtures:
x
Two threaded holes for M4
screws
x Adapter plates
and holders
(optional)
Display:
x New generation sunlight-
readable Matrix TFT display
x
Resolution 132 x 176 pixels
x 2 inch diagonal screen
Operation:
x
Integral push/turn button
x Zoom and settings
Power Supply and Batteries:
x
6 removable AA batteries (non-
re
chargeable or rechargeable)
x
Integral, intelligent battery
charger with temperature
monitor
x
Can operate directly attached
to aircraft on
-board electrical
power: 10 to 26V DC
x
Up to 5h battery life,
(depending upon traffic and
type of battery)