FLARM PowerFLARM - Fault Reporting and Controls

20
Fault Reporting and other Information
During normal operation the PowerFLARM display advises the
user on operational conditions. In addition, PowerFLARM has a
self-test function. Should it detect a fault, the unit will display a
fault report. Several types of reports might be displayed:
Serious Fault: Operation may not continue.
Caution / Fault: A fault has occurred and/or
extra care is required.
Information: Simple information report, no
fault.
Operation
PowerFLARM is operated using the integral turn-button with
push function.
Turn/push-button
The following table gives a brief overview of the most important
push-button combinations.
Brief push on button
Select / Enter
Longer push on button
Open/Close menu
Very long push on button
Switch On/Off
Turn button
Choose zoom depth, or select