Info
Information about the unit
Power Off
Switches unit off
Essential Settings Prior to First Flight
There are a number of FLARM settings that must be configured
prior to the use of PowerFLARM. These are aircraft-specific
settings, that can be found under 'Settings > 'Aircraft'. The values
chosen depend upon the aircraft and must be altered before the
unit is used in another aircraft.
These settings are obligatory for correct operation
of PowerFLARM.
Selection of Aircraft Type
This setting is required to specify the type of aircraft in which
your PowerFLARM will be used.
ICAO Address
Under this heading the user enters the ICAO address of the
aircraft in PowerFLARM unit. The aircraft's ICAO address is
found in the aircraft documents. It is the hexadecimal address
transmitted by a mode Mode-S Transponder, where fitted.
Incorrect settings will result in false alarms or a
failure of the warning function.
Transponder
Select whether your aircraft has a transponder, or not.
To Next Page
Loading...
