FLASHFORGE 3D PRINTER finder - Page 35



Finder User Guide | www.flashforge.com 0086-0579-82273989
35

PrintitdirectlywithyourFinderorexporttoyourUSBStick

ViewFlashPrinthomescreenfromoneofsixviewingangles

Movemodelaroundonxyplane;shift+clicktomovealongzaxis

Turnandrotateyourmodel

Scalethesizeofyourobject

Cutmodelintoseveralparts

6.2.3 Loading
You can load a model file or Gcode file into your Flashprint by the following six
methods:
Method 1: Click the
Load icon on the main interface. Then select the object
file.
Method 2: Select the file for loading and drag the file to the main interface of the
software.
Method 3: Click
[File]--[Load File]. Then select the object file for loading.
Method 4: Click
[File]--[Examples] to load the example files
Method 5: Click
[File]--[Recent Files] to load the files opened recently.
Method 6: Select and drag the target file to the icon of Flashprint.
Note: .STL, .OBJ, and .FPP, ways to store 3D models, are supported by Flashprint
for editing.
Generating Rilievo