27
Q12. How to solve the warping and weak adhesion?
Q6. Can we use filaments of other brands which are not produced by Flashforge？
Q7. Is Adventurer 4 Pro compatible with all kinds of AC power input?
Adventurer 4 Pro is equipped with a built-in 24V/13.3A power supply, suitable for
100V-240V input voltage.
Q8
. Can Adventurer 4 Pro automatically shut down after finishing printing?
No .
Q9. What kinds of file formats does Adventurer 4 Pro support?
Q10
. Does Adventurer 4 Pro support other cloud platforms besides FlashCloud?
Yes. Adventurer 4 Pro is open up to all other cloud platforms.
Input: 3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG Files.
Output: GX/G files.
Q11. Is it safe to print ABS filament?
Adventurer 4 Pro supports ABS, PLA, PETG, PLA-CF, PETG-CF, etc., which have different
ingredients. Adventurer 4 Pro has tested out the default parameters such as the optimal
temperature and filament extrusion according to the properties of Flashforge filaments to
ensure the best printing quality. Filaments of other brands can be used, but the parameters
shall be adjusted. Because the required temperature of different filament is slightly
different, it is recommended to clean the previous filament before using the new filament,
otherwise, it is easy to cause nozzle blockage.
ABS filament will release toxic gases during heating, so it is recommended to place the
printer in a well-ventilated environment when printing ABS. It is recommended to print
nontoxic materials such as PLA in children's activity places.
Method1: Heating up the platform can increase the adhesion between the platform and
model.
Method2: Add a raft when slicing the model.
Method 3: Apply solid glue to the platform before printing.
Method 4: Use the extruder calibration in the expert mode or leveling calibration to adjust
the distance between the nozzle and the platform.
Method 5: Make sure the platform is flat. It is recommended to perform a complete 30-point
leveling.
Method 6: Apply the extruder calibration to reduce the gap.
To Next Page
Loading...
