How to Change the Vat Film
1. Place resin vat flat on a flat surface and unscrew
all bolts with hexagon wrench.
2. Turn the resin vat over, unscrew four bolts from the
bottom of the resin vat plate.
3. Separate the bottom and middle plates of the
resin vat.
4. Remove the transparent glass, used vat film,
silicone washer. Keep the glass and silicone
washer and discard the used vat film.
Flat Washer
Spring Washer
Do not lose the washers when
removing the bolts.
!
WARNING
Resin Vat
Bottom Plate
Middle Plate
Use
d
V
a
t
F
i
lm
Transparent Glass
Silicone
Washer
13
To Next Page
Loading...
