5. Carefully clean the resin vat bottom plate,
middle plate, wall, transparent glass and
silicone washer. Ensure the transparent
glass surface has no dust nor fingerprints.
6. After washing, place the resin vat on a
workbench, then install the silicone washer.
7. Take out a new vat film then tear off the cover. 8. Place the vat film on the silicone washer,
aligning the screw holes.
!
Keep screw holes aligned
!
Keep screw holes aligned
Wall
Silicone Washer
Clean Parts
Resin Vat
Bottom Plate
Middle Plate
Transparent Glass
Silicone Washer
Wall
14
To Next Page
Loading...
