Flavel Linear HE User Manual

3.7 SETTING THE TIME, DATE & TEMPERATURE ON THE REMOTE
HANDSET
3.7.1 Fit the 2 off AA batteries to the handset by removing the cover on the
rear of the handset and inserting the batteries, ensure the correct +/-
polarity is observed. Following insertion of the batteries the screen
displayed will be as shown below in figure 39.
Fig. 39
3.7.2 Hold the handset with one hand ensuring your hand is wrapped around
the back and that your hand is in contact with both sides of the
handset. The green light of the “unlock” symbol should light and the
screen displayed will be as shown overpage in figure 40.
3.7.3 The “H” symbol as indicated in figure 40 overpage indicates that the
timer can now be set in either 24hr or 12hr mode. Press the + or -
buttons on the handset to toggle between the two settings, figure 40
overpage displays the 24hr mode.
34

Flavel Linear HE Specifications

General

Brand	Flavel
Model	Linear HE
Category	Indoor Fireplace
Language	English