Flexim FLUXUS ADM 8027 User Manual

A Menu Structure FLUXUS ADM 8027, F801, ADM 8127B
UMFLUXUS_F8V4-6-1EN, 2018-10-10 145
SYSTEM settings\Miscellaneous
selection of the display for the setting of the contrast and input of a HotCode
setting of the display contrast
confirmation that a HotCode has to be entered
input of a HotCode
Instrum. Inform.
selection of the displays for information about the transmitter
display of the type, serial number and max. available data logger memory x
display of type, serial number and firmware version with date (dd - day, mm -
month, yy - year)
x
Print Meas.Val.
selection of the displays for the transmission of stored measured values to a
PC
error message that no measured values are stored
start of the transmission of measured values
This display will only be indicated if the data logger contains measured values
and the transmitter is connected to a PC via a serial cable.
error message that there is a problem with the serial transmission
display of the data transmission progress
Delete Meas.Val.
selection of the displays for the deleting of stored measured values
confirmation for the deleting of measured values
This display will only be indicated if measured values are stored in the data
logger.
INIT-resis-
tant
SYSTEM settings↕
Miscellaneous
SETUP DISPLAY
← CONTRAST →
Input a HOTCODE
no >YES<
Please input a
HOTCODE: 000000
Special Funct. ↕
Instrum. Inform.
X80X -XXXXXXXX
Free: 18327
X80X -XXXXXXXX
V x.xx dd.mm.yy
Special Funct. ↕
Print Meas.Val.
NO VALUES !
Print Meas.Val.
Send Header 01
................
SERIAL ERROR !
Print Meas.Val.
■■■■■■
................
Special Funct. ↕
Delete Meas.Val.
Really Delete?
no >YES<

Flexim FLUXUS ADM 8027 Specifications

General

Brand	Flexim
Model	FLUXUS ADM 8027
Category	Measuring Instruments
Language	English