5.5 Printing (totalizing)
Summing printouts uses totalizing, e.g. each <ADD> printout will print
current weight and also add to an accumulating sum. When finished
totalizing, the operator can use the <SUM> printout to print the
accumulated sum (which is then also automatically cleared).
Printouts are only possible at stable equilibrium and positive gross
weight. Repeated print-outs require that the weight must be changed
between each print-out command.
See example below:
• Display shows current weight and is stable
• By pressing the <ADD> touch-button, current weight will be added
to the accumulating sum
To Next Page
Loading...