5.4 Printing (single)
‘Simple’ printouts use no totalizing, e.g. each printout will print current
weight reading with related data and thereafter return to normal
weighing. The next printout will contain no data from the previous
weighing.
Printouts are only possible at stable equilibrium and positive gross
weight. Repeated print-outs require that the weight must be changed
between each print-out command.
See example below:
• Display shows current weight and is stable
• By pressing, and holding, the <Print> button the current weight
reading and associated data is transmitted on communication ports
using the ‘print’ protocol and
”PRINT” appears on the display. Transmission is according to settings
for the PRINT-protocol.
• After printing the display reverts to show normal weight.
To Next Page
Loading...