7.2 Status indications
When showing an operational status, this does normally not impede the
indicators ability to function normally, however some features such as
weighing functions can be inhibited until the indicated state has passed.
Operational status indicates normal indicator states to the operator and
does not normally require any action by the operator.
7.2.1 Status, wait for power on zero
Normally the indicator is setup to acquire a power-on zero level at start.
This function requires that the weight value is within a certain interval
and at stable equilibrium before the indicator will enter operational
mode. The indicator will display this status according to below:
Optional action:
• The operator can abort the power-on zero setting by pressing
<Back> (cancel), the indicator will then enter operational mode.
To Next Page
Loading...