FLIR ADK User Manual

FLIR ADK
Getting Sta rt e d
The information contained herein does not contain technology as
defined by EAR,15 CFR772, is publicly available, and therefore
not subject to EAR.
5
the black lead to ground.
2.2 FLIR Boson GUI
An example GUI for streaming images and controlling the camera can be found here
https://www.flir.com/support-center/oem/camera-controller-gui-for-boson/
After the software is installed find the camera comport by opening Device Manager and
listing the available ports. Do this with the camera unplugged and with the camera plugged
into the computer. The port that shows up with the camera plugged in is the camera’s
comport.
With the camera’s comport known, open the BosonGUI software (icon is typically installed
on your desktop) and select the camera’s comport in the Port selection dropdown in the
lower right corner of the BosonGUI software. To start video streaming select “FLIR Video”
from the “Device Select” drop down menu on the left of the screen.

FLIR ADK Specifications

General

Brand	FLIR
Model	ADK
Category	Thermal cameras
Language	English