FLIR Blackfly S - Page 28

5 BlackflyS Physical Interface
BlackflyS Board-level Models
Note: Diagram is for reference only.
Actual number of pins is 6.
Color Pin Line Function Description Parameters Min Max Unit
Orange 1 0 GPIO0 Non-isolated Input/Output
Input Low Level 0 1.4 V
Input High Level 2.6 24 V
Propagation Delay 1 µs
Output Low Current 25 mA
Output High Level 0 24 V
Black 2 1 GPIO1 Non-isolated Input/Output
Input Low Level 0 1.4 V
Input High Level 2.6 24 V
Propagation Delay 1 µs
Output Low Current 25 mA
Output High Level 0 24 V
White 3 2 GPIO2 Non-isolated Input/Output
Input Low Level 0 1.4 V
Input High Level 2.6 24 V
Propagation Delay 1 µs
Output Low Current 25 mA
Output High Level 0 24 V
Board-level USB3
2/19/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
FLIR Blackfly
®
S Installation Guide 24