FLIR DM166 - Page 32

FLIR DM166 USER MANUAL Document Identifier: DM166-en-US_AA
32
Audible Continuity Tester
Continuity Threshold: Between 30 and 480
Continuity ON Response Time: <15ms
Capacitance
RANGE and RESOLUTION
Accuracy
20.00nF, 200.0nF
1.5% + 8d
2000nF, 20.00F, 200.0F
1.5% + 2d
2000F
2.0% + 2d
10.00mF
5.0% + 10d
Accuracies stated for film capacitors (or better)
Diode Tester
RANGE and RESOLUTION
Accuracy
3.000V
0.9% + 3d
Test Current: 0.3mA typical
Open Circuit Voltage: < 3.2VDC typical
DC Current
RANGE and RESOLUTION
Accuracy
Burden Voltage
600.0A
1)
, 6000A
1)
1.0% + 3d
0.1mV/A
60.00mA
1)
, 600.0mA
1) 2)
0.7% + 3d
1.9mV/mA
6.000A
3) 4)
, 10.00A
3) 4) 5)
0.04V/A
1) A/mA DC accuracy is affected by extreme internal meter temperatures. For rated accuracies, allow linear
proportional cool down intervals from 6 to 20 minutes after measuring currents from 3 to 10A continuously via
A-input.
2) <400mA continuous; >400mA for <20 minutes ON per >5 minutes OFF
3) 10A continuous up to ambient 95°F (35°C); <15 minutes on per >5 minutes off @ 95~122°F (35°C ~ 50°C)
4) >10A to 20A for <30 seconds ON per >5 minutes OFF