EasyManua.ls Logo

FLIR DNV14UX2 User Manual

FLIR DNV14UX2
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.flirsecurity.com
Copyright © 2013 FLIR Systems, Inc.
Instruction Manual
English Version 1.0
DNV14UX2
IR Vandal Dome IP Camera

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the FLIR DNV14UX2 and is the answer not in the manual?

FLIR DNV14UX2 Specifications

General IconGeneral
Sensor TypeUncooled VOx Microbolometer
Frame Rate30 Hz
Ingress ProtectionIP67
Spectral Range7.5–13.5 μm
Operating Temperature-40°C to 50°C

Summary

Important Safeguards

Installation

Safety and operating instructions for installing the video product.

General Precautions

Getting Started

1.1 Default Camera Username, Password, and Ports

Details default login credentials and network ports for camera access.

Connection

RJ45 Network Interface

Instructions for connecting the camera to a network via RJ45 Ethernet.

Camera Installation

Method 1 - Direct Attach Install

Guides direct mounting of the camera to a surface using a template.

Method 2 - Camera Base Install

Explains how to install the camera base onto a mounting surface.

Method 3 - Junction Box Install

Details installing the camera base onto a junction box plate.

Finding the Camera's IP Address

6.1 Finding the Camera's IP Address Using Syncro-V

Step-by-step guide to locate IP address using Syncro-V software.

6.2 Finding the Camera's IP Address using UPnP in Windows® 7

How to find IP address using UPnP on Windows 7.

6.3 Finding the Camera's IP Address using Bonjour® in Mac OS®

Method to find IP address using Bonjour on Mac OS.

Configuring Remote Connection

Port Forwarding Your Router

Instructions on how to configure router port forwarding for remote access.

Registering for FLIR DDNS

Guide on signing up for and setting up a free FLIR DDNS account.

Enabling DDNS on the Camera

Steps to enable and configure DDNS settings within the camera's interface.

Connecting to DDNS Address via Syncro-V

How to add a DDNS address to Syncro-V for remote camera access.

Web Configuration

8.6 Stream Configuration

Allows configuration of video stream settings like resolution and frame rate.

8.7.1 Local Network

Configures network settings, including static IP and DHCP options.

8.7.2 Device Port

Sets network ports for camera control, streaming, and web access.

8.8 Alarm Configuration

Configures various alarm types like disk full and motion detection.

8.9 Local Record

Manages local recording settings for microSD cards, NAS, and FTP.

8.11.1 DDNS

Detailed setup for configuring Dynamic DNS (DDNS) settings.

Resetting to Factory Defaults

Troubleshooting

Related product manuals