427-0030-00-12 Version 180 March 2018 27
2 Basic Operation and Configuration
Server > Security Options
Use the Security Options page to restrict access through the camera web server to specific IP
addresses and to set or change passwords. The admin login can change or set any password. The
expert login can only configure the expert login password.
As an additional security measure, limit which computers have access to the web browser interface.
Simply add a computer’s IP address and click Add. After all the allowed IP addresses are entered,
select the Save button to save the changes.
Note
To maintain security of the system set new passwords for each of the three login accounts.
• user—The user account can only use the Live Video page and controls.
• expert—The expert account can use the Live Video page, the camera Setup page, the Server
pages on the Maintenance menu, and set the password for the expert login.
• admin—The admin account can use all pages and set passwords.
A VMS Remote to the camera, ONVIF or Nexus CGI, uses the same password as the web interface.
Refer to
Sensor > Communications > VMS Remote, pg. 29.
Select login
Click Edit
Enter new password
Click Save
Confirm password
To Next Page
Loading...
