The Nation's First Nationally Recognized Testing Laboratory
MET Laboratories, Inc. is accredited by OSHA and the Standards Council of Canada.
Canadian Certification has been granted under a System 3 program as defined in ISO/IEC 17067.
SAFJ TEMP-160-0 Approval Letter for US CAN and MEX 5-31-16.doc Page 1 of 1
MET Laboratories, Inc. Safety Certification - EMI - Telecom - Environmental Simulation - NEBS
914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230-3432 • PHONE (410) 949-1802 • FAX (410) 354-3313
December 13, 2016
FLIR Systems AB
Mr. Johan Eidefors
Antennvägen 6
PO Box 7376
SE-187 15
Täby, Sweden
Subject: FLIR Systems AB, GFx320 Optical Gas Imaging Camera
Listing Number E114032; MET Project Number 92286
Safety Standards:
UL 60950-1/CSA C22.2 No. 60950-1, Second Edition, Information
Technology Equipment
ANSI/ISA-12.12.01-2016 Nonincendive Electrical Equipment for
Use in Class I and II, Division 2 and Class III, Divisions 1 and 2
Hazardous (Classified) Locations, Seventh Edition
C22.2 NO. 213-16 – Nonincendive electrical equipment for use in
Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous
(classified) locations, Second Edition
Dear Mr. Eidefors:
Congratulations on successfully completing the MET Certification process for the GFx320 Optical Gas
Imaging Camera.
FLIR Systems AB may begin to apply the MET Mark on the previously identified product
at this time in accordance with the MET Mark Utilization Agreement or the MET Applicant Contract. The
report covering the above stated product is forthcoming.
Thank you for the opportunity to perform this service for FLIR Systems AB. We look forward to future
opportunities with your company.
Sincerely,
MET LABORATORIES, INC.
Rick Cooper
Director,
Safety Business Line
To Next Page
Loading...
Need help?
General
