Safety information
2
CAUTION
Only use the camera with a battery that has the item part number T199183 on it (that FLIR Systems
supplies). If you do not obey this, damage to the equipment can occur and the protection that the equip-
ment gives can become unsatisfactory.
CAUTION
Only use the camera with the following accessories (that FLIR Systems supplies). If you do not obey
this, the protection that the equipment gives can become unsatisfactory.
Product name Item part number Sales part number
Hand strap T129728 T129728ACC
Neck strap T129729
T129729ACC
Lens cap T129739 T129739ACC
Lens cap strap T129867
T129867ACC
CAUTION
Do not connect a power supply to the battery while the battery is in the camera. Damage to the camera
can occur.
CAUTION
Inside a classified (hazardous) area, only use the camera in a temperature range between –20°C to
+40°C (–4°F to +104°F). This is the certification temperature range for explosive atmospheres.
Outside a classified (hazardous) area, do not use the camera in temperatures more than +50°C (+122°
F). High temperatures can cause damage to the camera.
CAUTION
Do not remove the infrared lens. If you do not obey this, the protection that the equipment gives can be-
come unsatisfactory.
CAUTION
Do not make markings on the camera. Markings include labels, engravings, printing, melting, and so
forth. If you do not obey this, the protection that the equipment gives can become unsatisfactory.
CAUTION
Make sure that you do not use a torque value that is more than 80 Ncm on the Torx T20 screw. Damage
to the camera can occur if you do not obey this.
Note The encapsulation rating is only applicable when all the openings on the camera
are sealed with their correct covers, hatches, or caps. This includes the compartments
for data storage, batteries, and connectors.
2.2 General cautions and warnings
WARNING
Applicability: Class A digital devices.
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used
in accordance with the instruction manual, may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to take whatever meas-
ures may be required to correct the interference.
#T810169; r. AN/42241/42268; en-US
5
To Next Page
Loading...
Need help?
General
