Handling the camera18
18.15 Assigning functions to the
programmable button
18.15.1 General
The camera has a programmable button. You can assign one of the following functions
to the programmable button:
• Change the zoom factor.
• Hide/show graphics.
• Change the polarity.
• Change the palette.
18.15.2 Procedure
Follow this procedure:
1. Turn the mode wheel to
to enter setup mode.
2. Select the Preferences tab and push the joystick.
3. Select Programmable button and push the joystick.
4. Select one of the functions and push the joystick.
5. To leave the setup mode, turn the mode wheel and select another mode.
#T810169; r. AN/42241/42268; en-US
59
To Next Page
Loading...
