EasyManua.ls Logo

FLIR InfraCAM - Page 115

FLIR InfraCAM
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
part. At a certain height there is a neutral zone where the pressures on the inside and
outside are the same, see the figure on page 102. This differential pressure may be
described by the relationship:
Air pressure differential within the structure in PaΔp
9.81 m/s
2
g
Air density in kg/m
3
ρ
u
Thermodynamic air temperature outdoors in KT
u
Thermodynamic air temperature indoors in KT
i
Distance from the neutral zone in metersh
If ρ
u
= 1.29 kg/m
3
(density of air at a temperature of 273 K and ≈100 kPa), this pro-
duces:
With a difference of +25°C (+77°F) between the ambient internal and external tem-
peratures, the result is a differential pressure difference within the structure of about
1 Pa/m difference in height (= 3.28 Pa/ft.).
12
Publ. No. 1558299 Rev. a200 ENGLISH (EN) February 12, 2007 101
12 Introduction to building thermography

Table of Contents

Other manuals for FLIR InfraCAM

Related product manuals