NOTE
When you save an image to the camera memory, you save the measured value too.
■
■
You can save 50 images to the camera memory (applies only to models without
SD Memory Card).
■
You can save 1,000 images to the SD Memory Card (applies only to models with
SD Memory Card). More than 1,000 images can be saved on larger SD Memory
Cards, but this will decrease the performance of the camera.
■
The image file format is compatible with ThermaCAM™ Reporter 8.0 and later
(applies only to models with SD Memory Card).
8
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007 35
8 – Operating the camera
To Next Page
Loading...
