NOTE
Do not point the infrared camera (with or without the lens cover) at intensive energy
sources, for example devices that emit laser radiation, or the sun for a long period
of time. This can have an unwanted effect on the accuracy of the camera. It can also
cause damage to the detector in the camera.
SEE ALSO
For more information about how to measure reflected apparent tempetature, see the
ISO standard DIS 18434-1 and the ASTM standard ASTM E1862-97.
8
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007 47
8 – Operating the camera
To Next Page
Loading...
