Settings Menu
432-0012-01-10 Version 110 27
Advanced Image Menu
IR eZoom, VIS eZoom: (On/Off)
The IR camera will extend past the 14x optical zoom with an additional
8x eZoom (to 112x). After the lens reaches the maximum optical zoom,
the zoom scale shown on the display changes as shown at the right.
The scale will change back to 14x when the eZoom is decreased to
zero.
The visible camera will extend past the 30x optical zoom with an
additional 12x eZoom (to 360x). The VIS eZoom and scale when the
visible camera is selected works in a similar manner as the IR camera.
VIS low light mode: (Auto/Manual)
When set to manual, use the VIS low light mode button on the Main menu to turn low light mode
On/Off. When set to Auto, this setting will override the Main menu button within about five seconds
(refer to “VIS low light mode:” on page 25).
VIS wide dynamic range: (On/Off)
When set to On, image processing provides clearer, more detailed images in high-contrast or
backlit environments by enhancing shadows and blown-out highlights in accordance with the
intensity difference.
VIS electronic stabilization: (On/Off)
When set to On, image processing compensates for camera vibration by slightly decreasing the
image near the edges of the frame allowing a centered image to appear more stable.
VIS defog: (On/Off)
When set to On, a foggy or low contrast scene will appear clearer.
To Next Page
Loading...
