Joystick Operation
432-0012-01-10 Version 110 34
Joystick Operation
When the Video Tracking mode is enabled by
pressing the right joystick button, the behavior
of the joystick changes so that tracker-specific
features can be controlled.
When acquiring a target, use the JCU II to:
• Point the camera at the area containing a
possible target
(normal pan and tilt joystick operation).
• Begin tracking a target
(press right joystick button again).
• Resize the acquisition gate
(hold right joystick button and twist to
resize gate).
Once y
ou engage tracking, use the JCU II to:
• Resize the tracking g
ate
(
hold right joystick button a
nd
twist to resize gate).
•
Disengage Video Tracking
(press left joystick button).
•
Re-acquire a target or acquire a new target
(press right joystick button).
Video Tracker Errors
If the red cross hairs are seen it means one of
two things:
Communications error with the imx6
• In the case of a Comms error, Nexus
will
reset the imx6 which may take 1-2 minutes, it
will do this 5 times before giving up
• If the Tracker reconnects in any of the 5 times
all operations will return to normal
• During the error period attempting to enter
Track mode will show the box with red cross
hairs
Tracker reports a problem capturing frames from one of the cameras
• Tracking on the other camera should behave as normal
• Attempting to Track on the camera that has an error will give the red box
SelectExit Video
target
Tracking
To Next Page
Loading...
